go back

Manfrotto 054 conversion set 4 arca swiss kirk markins wimberley acratech rrs

Current Price:103.00 USD
Ends:April 8, 2019, 13:55 UTC
  Click here to bid on this item.

Manfrotto 496 Arca Swiss

PART M496 Plate F62

Please note that not all items shown on the pictures may be included in the   auction, and they are for presentation purposes only.  To determine   items for sale please see reference in the section "".

Click to view super sized image


New Hejnar Photo conversion set for Manfrotto 054 and 055Mag Ball Head. This combination of plate and standard arca swiss clamp will let you use any arca type equipment with this ball head. Clamp can disconnected from plate and use independent on other equipment if needed. It is the best quick release system for tripods and monopods when combined with Arca style ball head and quick release clamps.

All the corners and edges are rounded  for the safety to prevent from accidental injuries or damages to the other equipments.

Adapter plate is attached to Manfrotto  head in few  simple steps.
1) Remove original Manfrotto platform..
2) Align slots on plate back with island on Manfrotto post.
3) Attach conversion plate in place of original Manfrotto platform using original center screw.
4) Attach clamp to adapter plate using two side holes and provided 10-32 screws.

Plate Specification:

  • 2.3750 inch long
  • 2 inch wide
  • 3/8 inch thick plus
  • Made from 6061-T6 Aluminum.
  • Made in USA
  • Black hard coat anodized.

Clamp Specification:

  • 2.375 inch long
  • Weight 3.6oz (103g)
  • Center socket is countersunk on top but also threaded 3⁄8”-16.
  • Two outside holes are taped 1/4-20 and 30mm apart from each other.
  • 2.6mm deep relief grooves   guarantee compatibility with most plates/rails.
  • Relief groove  prevents free fall when the clamp is not fully closed and your plate has safety stops
  • Knob is captive. Knob stops at maximum opening  - cannot be lost in the field
  • Knob is made from one part aluminum. No room for dust or sand.
  • Back side has grove to match some ball heads connection and preventing it from twisting.
  • Precision C.N.C. machined from 6061-T6 Aluminium
  • Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
  • Stainless steel hardware.
  • Black hard coat anodized surface.
  • Made in USA

Auction Includes:

  • One adapter  plate.
  • One F62 Clamp
  • Two 10-32 screws for clamp mount.
  • Hex key for ¼-20 screw and  10-32 screws.
  • Questions

    If you have question about my product please read If this does not answer your question please drop me a line.


To bid on or purchase this item click here.
©2019 gousaproducts.com