go back

8.0 x 5/8 rail 4 arca swiss wimberley kirk markins benro acratech feisol

Current Price:65.00 USD
Ends:October 10, 2018, 20:30 UTC
  Click here to bid on this item.

Hejnar Photo G016-80
PART G016-80

Please note that not all items shown on the pictures may be included in the   auction, and they are for presentation purposes only.  To determine   items for sale please see reference in the section "".

Click to view super sized image

Description:

New Hejnar Photo Quick Release Arca Swiss type 8.00 inch  rail with one captive style slots. 5/8 inch thick. Engraved metric scale for  references on two sides of rail . Bubble level on  end. Rail is equiped with  taped 1/4-20 hole on end and two 5mm dowels pins openings. Pins prevent clamp from twisting if you mount clamp on rail end. Rail  is also equipped along each side with M3  taped holes. You can mount screw type stop bar if you need to use one.

It is the best quick release system for tripods and monopods when combined with Arca style ball head and clamps. This plate is designed to work with variety of ARCA SWISS TYPE quick release system.

Rail can be used as:

  • Macro Rail
  • Lens Plate
  • Need to put more light through an umbrella in the studio    MPR will do.
  • NODAL slide to eliminate parallax (combine with clamp )
  • Long lens support- combine with lens support plate and clamp.

It is the best quick release system for tripods and monopods when combined with Arca style ball head and clamps. This plate is designed to work with variety of ARCA TYPE quick release systems

Specification:

  • 8.00 inch long
  • 1.5 inch wide
  • 5/8 inch thick.
  • Weight 7.4 oz (210g).
  • Metric scale engraveed on each side of rail.
  • Hole in front for lens support or other accessories. (1/4-20 tap hole)
  • One captive style slot.
  • Plate incorporates a double-dovetail.
  • Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
  • Made from 6061-T6 Aluminum.
  • Made in USA
  • Black hard coat anodized.
  • Two screws. Screw will be about 0.3 above plate surface. If you are planning of using plate with blind hole please check dept of it. You may need shorter screw.

Auction Includes:

  • One 8.00 inch plate.
  • Two 1/4-20 ½ inch captive style screw.
  • Two M3 screws attached to the plate.
  • Hex key for ¼-20 screw and M3 screw.
  • Questions

    If you have question about my product please read If this does not answer your question please drop me a line.

 



To bid on or purchase this item click here.
©2018 gousaproducts.com