Please note that not all items shown on the pictures may be included in the auction, and they are for presentation purposes only. To determine items for sale please see reference in the section "".
New Hejnar Photo base panorama set. Set include two quick release 8.00 inch Multi Purpose Rail (MPR) and 90 degree connector. This parts connected together serve as starting point for single and multi rows panorama. Additional rail, clamps or rail with integrated clamp will be required for multi row panoramas. You will also need one or two pano clamps.
It is the best quick release system for tripods and monopods when combined with Arca style ball head and quick release clamps. International standard dove-tail rail, compatible with Arca-Swiss type quick release clamps:
- Markins including level release clamp
- Really Right Stuff, including level release clamp.
- Arca Swiss
- Photo Clam
- Foba (Foba uses different safety stop mechanism, so safety stops may need removing)
- Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series)
- Custom Brackets
- Jobu Designs
All the corners and edges are rounded for the safety to prevent from accidental injuries or damages to the other equipment.
- 8.00 inch long
- 1.5 inch wide
- 3/8 inch thick.
- Weight 3.5oz (98g)
- Engraved metric scale.
- Three captive style slots.
- Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
- Made from 6061-T6 aluminum.
- Made in USA
- Plate incorporates a double-dovetail. Double-dovetail design allows for dual clamping surfaces on rail.
- Black hard coat anodized.
- Screw will be about 0.3 above plate surface. If you are planning of using plate with blind hole please check depth of it. You may need shorter screw.
- 1.25 inch long ( without anti twist island)
- 1.375 inch wide
- Anti twist island measure 0.212 inch wide and 0.1 inch height
- Weight 2.0 oz. (56g)
- Two 1/4 -20 taped holes
- Made from 6061-T6 Aluminum.
- Made in USA
- Black Anodized.
- Two 8.00 inch rails.
- Four 1/4-20 ½ inch captive style screw.
- Four M3 screws attached to the plate.
- Hex key for ¼-20 screw and M3 screw.
- One 90 degree connector block.